Top 10 1/2 Inch Irrigation Tubing End Cap – Automatic Drip Irrigation Kits

As an Amazon Associate I earn from qualifying purchases.

1. Hotop

#ad

Hotop 12 Pieces Drip Irrigation Tubing End Cap Plug 1/2 Inch Universal End Cap Fitting, Compatible with 16-17mm Drip Tape Tubing Sprinkler System

#ad
Hotop #ad - Features: the drip irrigation tube end cap fittings are suitable for 1/2 inches drip irrigation pipe joints; Water pressure: 30 PSI, the end grips the tube to ensure a secure leak-proof connection, and the twist lock adds fixation to the tubing for a secure connection every time.

Method to use: just push the tube firmly into the barb and it will fit tightly without leaking, easy to install, if needed, no glue or other tools are required, you can soften the end of the tube with a hair dryer before inserting it. Reliable material: the drip irrigation tube end cap fittings are made of plastic mainly, durable and non-toxic, can provide you a long-term service, will not break easily, will bring you a nice using experience.

Amount of quantity: 12 pieces of drip irrigation tubing end cap plugs, sufficient quantity can satisfy your daily use and replacement demands. Wide applications: the drip irrigation pipe fittings are compatible with 16 mm and 17 mm drip irrigation pipes, can also be applied for elevated garden beds, farm, residential, greenhouse horticulture and agricultural watering applications.
BrandHotop #ad
ManufacturerHotop #ad

2. One Stop Outdoor

#ad

Fits All Brands 16-17mm Drip Tape AG Tubing 10, 1/2" Universal Perma Connector Barbed Locking Fitting, End Cap, One Stop Outdoor 10-Pack Drip Irrigation Tubing End Cap Plug

#ad
One Stop Outdoor #ad - Use: cap off the end of a tubing run. Allows creation of a custom layout for your planting area. Incoming pressure: 30 PSI. Universal fit end cap plug: fits all brands 16 & 17mm Drip Tape Tubing! Material: constructed of highly durable UV and chemical-resistant materials to assure long life. Connect and configure drip irrigation tubing to your desired layout. Locking fit: barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time! .
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad
Height1.5 Inches
Length4 Inches
Width5 Inches

3. One Stop Outdoor

#ad

20-PACK, Barbed Connectors Fits Most Brands, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems End Plug 20-Pack, Irrigation Fittings End Plugs for 1/2" Drip Tubing

#ad
One Stop Outdoor #ad - Simple to install. Secure and easy installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI.

These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. High impact plastic construction, 20-Pack End Cap Closures - Used to plug the end of your poly tubing. Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

4. One Stop Outdoor

#ad

5-Pack, 1/2" Inch Drip Irrigation Connector Fitting, Compression Hose END Cap, Drip Irrigation Fitting .700 OD Fits Poly Tubing .680" OD.700" OD & .704" OD

#ad
One Stop Outdoor #ad - Recommended for use with 25PSI. Operating pressure: 10 to 30 PSI. Fits poly tubing. 680" od,. 700" od &. 704" od. Secure and easy installation without glues or clamps. Pressure Regulator. Uv resistant High Impact Plastic.
BrandOne Stop Outdoor #ad
ManufacturerDIG #ad
Height2 Inches
Length5 Inches
Width5 Inches

5. One Stop Outdoor

#ad

Fits 1/2”, 17mm .600” ID Drip Tubing, One Stop Outdoor 20-Pack Drip Irrigation Black Figure 8 End Caps Barbed Fittings, Made in The USA Figure 8 End 20 Pack

#ad
One Stop Outdoor #ad - Quality - premium quality uv resistant 1/2 Inch, 17mm Figure 8 End Caps. Fit / function - use to reconfigure and connect - 1/2" drip tubing or drip line with. 550 id to. 600 id. Operating pressure - up to 30 PSI please check and regulate your water pressure to prevent leaks or blowouts! Made in the usa - proudly manufactured in the USA! Easy installation - No glue or clamps needed! .
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

6. Antelco

#ad

Antelco Barbed 1/2" 16mm Tubing End Cap for Drip Irrigation Systems- 5 Pack Part 47625

#ad
Antelco #ad - Pack of 5 individual units. 100% satisfaction Guarantee. Excellent Customer Service. Same day shipping m-F to 5PM EST.
BrandAntelco #ad
Part Number47625

7. Orbit

#ad

Orbit DripMaster 67468 1/2-Inch Universal End with Cap

#ad
Orbit #ad - Reusable-loosen nut to remove tubing. Reusable-loosen nut to remove tubing. Durable construction provides years of reliable use. Works with all major brands of 1/2-inch distribution tubing-. 620-inch-. 710-inch od. For outdoor use with cold water only.
BrandOrbit #ad
ManufacturerOrbit Underground/Sunmate #ad
Height1.38 Inches
Length2.63 Inches
Weight0.05 Pounds
Width1.38 Inches
Part Number67468
Model67468

8. Hotop

#ad

Flower Bed, Hotop 20 Pieces 1/2 Inch Drip Tubing End Drip Irrigation Tubing End Cap Plug Universal End Cap Fitting Drip Tubing End Plug Connectors for 1/2 Inch Tubing for Garden Greenhouse, Lawn

#ad
Hotop #ad - Durable to use: the drip irrigation tube end cap fittings are made of quality plastic, will not break easily, durable and non-toxic, can provide you a long-term service, nice for outdoor using, weather-resistant, will bring you a nice using experience.

What you receive: package comes with 20 pieces drip tubing ends, suitable for 1/2 inch tubes, enough quantity to meet your long time use and daily replacements. Wide applications: the drip irrigation pipe ends can be applied for elevated garden beds, greenhouse horticulture and agricultural watering applications, farm, patio, residential, flower bed, bring much convenience to you. Easy to install: these drip tubing end plug connectors are easy to install without needing other tools, simply push the tubing firmly over the barbed for a very tight fit that won't leak, no glue or clamps needed, and it is also easy to remove when not use.

Non-leakage: the drip irrigation tubing end cap features non-leakage design, and the twist lock adds fixation to the tubing for a secure connection every time, which can allow you to connect and configure the drip irrigation tube to the desired layout and allow you to create custom layouts for your planting area, will not cause unnecessary waste.
BrandHotop #ad
ManufacturerHotop #ad
Part NumberHotop-Drip Tubing End-0472

9. LASCO

#ad

5/8-Inch Blue Stripe Tubing, 0.71-Inch, LASCO 15-8520P Drip Micro Irrigation Tubing End Cap for 1/2-Inch

#ad
LASCO #ad - Plastic drip irrigation fitting. Uv protected plastic. Fits 1/2-inch blue strip tubing 5/8-Inch. 710 od. Tubing end cap "710". Drip and micro irrigation.
BrandLASCO #ad
ManufacturerLASCO #ad
Height1.28 Inches
Length2.75 Inches
Weight0.8 Pounds
Width1.28 Inches
Part Number15-8520P
Model15-8520P
Warranty1 Year Warranty

10. xGarden

#ad

XGarden 1/2" Figure 8 End Cap Hose Clamp Fitting for Hydroponic Drip Irrigation Tubing, 10 Units per Bag

#ad
xGarden #ad - High quality uV resistant plastic - Easy to install. Inside dimension measurement of each circle/hole is 07" 17. 5mm. 10 pack black xgarden 1/2" Figure 8 End Cap Hose Clamp Fitting. Xgarden brand - buy from a brand you know and trust - xGarden products are exclusively distributed by Bywater Shop. Compatible with any 1/2" drip irrigation or hydroponic tubing.
BrandxGarden #ad
ManufacturerxGarden #ad
Part NumberSP067