Top 10 Adventurer Li 30A PWM Flush Mount Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Gel, Compatible with Sealed, Flooded and Lithium Batteries, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#ad
Renogy #ad - Any negative connection on the solar module, battery and load can be safely earth grounded as required. 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. An included surface Mount Attachment allows for versatility in mounting.

This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance. The adventurer is a negative ground controller. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app.

Backlit lcd screen for displaying operating information and error codes. 5v 2. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. Designed to cleanly flush mount on walls, providing a sleek, integrated look. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.6 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

2. Renogy

#ad

Gel, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Sealed, and Flooded batteries and Renogy Bluetooth Module

#ad
Renogy #ad - Multiple led indicators for easy to read charge status and battery information. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.

Optimized for a 12v system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Then secure each cable by rotating the screws clockwise CW to the closed position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.29 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller

3. Renogy

#ad

Renogy 300 Watts 12 Volts Monocrystalline Solar RV Kit with 30A PWM LCD Charge Controller/Solar Panel Connectors/Tray Cable/Corner Bracket Mount/Cable Entry housing for RV, Boat

#ad
Renogy #ad - Corrosionresistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa. Monocrystalline solar cell efficiency: 21%.

Power source type: Solar Powered. Order will be delivered in multiple packages; Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. Complete kit includes: 1 renogy 300 watt 12 volt monocrystalline solar Panel 2 Adventurer Li 30A PWM Flush Mount Charge Controller 3 Connectors 4Tray Cable 5Corner Bracket Mount 6 Adaptor Kit. Designed for off-grid solar panel system, RV, caravan, boat, Green house solar panel system. This kit includes our adventurer 30A PWM Flush Mount Charge Controller can charge the battery quickly and safely under almost any condition.
BrandRenogy #ad
ManufacturerRenogy #ad
Height8 Inches
Length48 Inches
Weight66 Pounds
Width23 Inches
Part Number791810324546
Model300 Watts 12 Volts Monocrystalline Solar
Warrantyf gifted or resold the customer must go through the original Purchaser in order to claim warranty. Original order information is needed to claim warranty.If original order was shipped within the US, the Purchaser will be responsible for additional shipping costs out of the US.The Customer’s sole and exclusive remedy and the entire liability of the Warrantor, its suppliers and affiliates for breach of the warranty is, either to replace the PV module(s)or component partsof the PV module(s) and in some cases refund the PV module(s) cost. This warranty does not cover labor.PV modulesor components that have been serviced or replaced under their warranty period do not receive extended warranties. Instead, the serviced/replaced PV module(s)will abide to the original warranty period issued when first purchased. No employee, agent, dealer or any other person is authorized to give any warranties on behalf of the Warrantor, not expressly set forth in this limited warranty.

4. Renogy

#ad

Renogy 100 Watt 12 Volt Extremely Flexible Monocrystalline Solar Panel & Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#ad
Renogy #ad - Etfe material also has antifouling and self-cleaning abilities, ensure best performance day after day. The lightweight design also contributes to lower mpg on vehicles. Product 2: the adventurer is a negative ground controller. Product 2: compatible with 12v and 24V system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready.

Product 1: sleek and barely noticeable, the renogy 100W flexible solar panel laid flat is only a tenth of an inch tall! Approximately 95% thinner than its rigid counterpart, this panel is ideal for a stealthy solar setup. Product 1: with a flex range of up to 248 degrees, this panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream. Product 2: backlit lcd screen for displaying operating information and error codes. Any negative connection on the solar module, battery and load can be safely earth grounded as required.

Product 1: thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current. Product 1: etfe material has higher light transmittance, longer service life than PET material. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.
BrandRenogy #ad

5. RICH SOLAR

#ad

RICH SOLAR Solar Charge Controller 30A PWM

#ad
RICH SOLAR #ad - It provides a dot matrix graphic LCD screen and a human-machine interface with a key, which makes operation on the interface rather convenient. 12v/24v system voltages are automatically recognized.

Light control: when daylight begins the light source will turn off; meanwhile, the solar panels will charge the batteries. When there is no sunlight the garden light will switch on. With temperature compensation employed, charging parameters can be automatically adjusted. 30a amp solar charge controller is an intelligent and multifunctional solar charge controller with a dual USB ports design to charge electronic devices.

The product provides overcharge, overload protection, over-discharge, as well as short-circuit and reverse-connection protection. All of the controlling parameters can be reset flexibly to satisfy the user's particular needs. A wide range of load working modes facilitate the product's application to different types of load.
BrandRICH SOLAR #ad
ManufacturerRICH SOLAR #ad
Height2.5 Inches
Length7 Inches
Width3 Inches

6. Renogy

#ad

Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - Reverse protection: any combination of solar module and Battery, and lithium. Customizable charging voltages. Compatible with various deep cycle battery options: sealed, over-discharging, float, boost, gel, and short circuit.

Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Conversion efficiency of 98%. 4-stage charging: bulk, flooded, overload, and equalization and LCD screen with programmable charging parameters. Charges over-discharged Lithium-Ion batteries. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy DC Home Smart phone app.

Electronic protection: overcharging, without causing damage to any component. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Error code detection for easy self diagnoses.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium
Warranty2-year material and workmanship warranty

7. Binen

#ad

30A Solar Charge Controller, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent

#ad
Binen #ad - Lcd display: comes with a display that can clearly indicate the status and data, suitable for home, it can be conveniently switched modes and parameter configuration, industrial, commercial etc. Discharge current: 10A, automatically manage the working of solar panel and battery in solar system.

Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, it is not suited for nickel hydride, once the voltage of the battery drop below 8V, lithium, Liions, or other batteries. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet reverse current protection, then the solar panel, well-ventilated place. Fully 3-stage pwm charge management, once the voltage of the battery drop below 8V, open-circuit protection, improve system efficiency and prolong the life span of the battery.

For protecting the lifespan of your battery, reverse protection, the solar controller will turn off automatically. Dual usb output 5V/2. 5a max, build-in industrial micro controller, to support mobile phone chargeing. For protecting the lifespan of your battery, AGM, GEL, the solar controller will turn off automatically. Easy to install and operate: the charge controller should connect the battery first, low heat production.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

8. HQST

#ad

HQST Voyager PWM 20A 12/24V Waterproof Common Postive Solar Charge Controller with LCD Display

#ad
HQST #ad - 4 battery type compatible – gel, absorption, float, AGM, Flooded, Lithium.4-stage pwm charging: Bulk, & Equalization. Waterproof design, suitable for indoor or outdoor use. Protections: multiple Battery, Controller, and PV electronic protections. Smart pwm technology, high efficiency with reawakening Lithium feature. Common positive charge controller. Backlit lcd displaying system operating information and error codes.
BrandHQST #ad
ManufacturerHQST #ad

9. AIMS Power

#ad

AIMS Power Flush Mount 30 Amp Solar Charge Controller 12/24V PWM

#ad
AIMS Power #ad - Works with 12 and 24 volt battery systems. Uses the latest pwm charging technology and state of charge monitoring, adjusts charging based on battery voltage prolonging overall battery life. Supported with a 2-year warranty from AIMS Power when purchased from authorized resellers. Protections: overload, short circuit, high temperature, high voltage, low voltage and auto correct. Lcd displays key information such as battery voltage, solar panel voltage, solar panel charging current and load discharging current. Small and compact ideal for small areas. Pv input, battery output ports.
BrandAIMS Power #ad
ManufacturerAIMS POWER #ad
Part NumberSCC30AFM
Warranty1 Year Manufacturers Warranty with AIMS Power (Must purchase from authorized reseller)

10. HQST

#ad

HQST Solar Charge Controller 30Amp 12V/24V PWM Positive Ground with LCD Screen,Compatible with Gel, Flooded and Sealed Lead Acid/AGM Batteries

#ad
HQST #ad - Integrated lcd screen and 2 key user-interface. Automatic 12v or 24v system detection for batteries. 3 pre-set deep cycle battery options: Gel, Flooded, and Sealed Lead Acid/AGM. An upgraded 3-stage pwm charging algorithm is adopted: Bulk, Boost, Float. Intergrated USB function for supplemental charging. With temperature compensation employed, charging parameters can be automatically adjusted. Electronic protections include over-discharge, short circuit, over-charge, overload, and short-circuit protection.
BrandHQST #ad
ManufacturerHQST #ad