Top 10 Arduino case Enclosure – Computer Cases

As an Amazon Associate I earn from qualifying purchases.

1. sb components

#ad

SB Uno R3 Case Enclosure New Transparent Clear Computer Box Compatible with Arduino UNO R3

#adsb components #ad - Secondary screw-mounting points for securing your Arduino. This is a no-nonsense protective case designed specifically for the Arduino Uno. Includes reset key for use with the Uno's reset button. It also includes an integrated power switch for the Arduino. Holds the Arduino firmly in place. Access to all Arduino UNO connectors. The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino. It provides tough protection for the Arduino UNO while providing access to all Arduino connectors.

Brand	sb components #ad
Manufacturer	SainStore Inc. #ad
Height	1.8 Inches
Length	3 Inches
Weight	0.09 Pounds
Width	2.4 Inches
Part Number	101-30-246
Model	101-30-246

2. SunFounder

#ad

SunFounder 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3, Genuino Mega 2560 Rev3 

#adSunFounder #ad - Provides excellent protection and fashionable appearance. The protective case of 2560 controller board compatible with Arduino. Note: the protective film of the case may show a little black, tearing the protective film it will look clean and not affect the use. Unique design for 2560 controller board with pin leakage, which provides easy connection to other components. The 2560 controller board case is maded by premium acrylic. Fastened by eight screws, very easy to install and secure.

Brand	SunFounder #ad
Manufacturer	SunFounder #ad
Height	0.08 Inches
Length	4.41 Inches
Width	2.36 Inches
Part Number	Mega 2560
Model	Mega 2560 case

3. Gikfun

#ad

Gikfun Uno R3 Case Enclosure Transparent Clear Computer Box Compatible with Arduino UNO R3 EK1642

#adGikfun #ad - Reset button outside and provides access to ports. Clear case and you can see the UNO R3 protective paper needs to be peeled off. Uno r3 is not inclued. Compact and solid case for Arduino UNO R3.

Brand	Gikfun #ad
Manufacturer	Esooho #ad
Height	2.9 Inches
Length	3.5 Inches
Width	0.4 Inches
Part Number	LYSB00UBT87XM-ELECTRNCS
Model	LYSB00UBT87XM-ELECTRNCS

4. Geekworm

#ad

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Black

#adGeekworm #ad - Packing list: 1x uno r3 abs case-black; 4x M2. 5x6mm screws; 1x 4pcs rubber pads. Arduino UNO Case. Net weight: 21g; case size: 7. 5cm x 6cm x 2cm 2. 95inch x 2. 36inch x 078inch; it is design with two nice "+" holes and 10 "-" holes for cooling system. This abs black case is perfect compatible with arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. Note: the uno r3 board is not included in the packing list. It is very easy to install and Mini & attractive body to carry everywhere.

Brand	Geekworm #ad
Manufacturer	Geekworm #ad
Height	0 Inches
Length	0 Inches
Weight	0.05 Pounds
Width	0 Inches
Part Number	TB-2019-01
Model	TB-375134
Warranty	3 months

5. HiLetgo

#ad

HiLetgo 5pcs UNO R3 ATmega328P ATMEGA16U2 Enclosure Case Kits Transparent Acrylic Enclosure Case UNO Case Enclosure Box for Arduino UNO R3 with Screws and Install Instructions Pack of 5

#adHiLetgo #ad - Provides excellent protection, with fashion appearance. Uno r3 enclosure case Transparent Acrylic Enclosure Case. Comes with the English installation instructions. Unique design for uno R3 with pin leakage, which provides easy connection to other components. Easy to install and secure for Uno R3.

Brand	HiLetgo #ad
Manufacturer	HiLetgo #ad
Part Number	3-01-1552

6. sb components

#ad

SB Uno R3 Case Enclosure New Transparent Blue Computer Box Compatible with Arduino UNO R3

#adsb components #ad - This is a no-nonsense protective case designed specifically for the Arduino Uno. It also includes an integrated power switch for the Arduino. Includes reset key for use with the Uno's reset button. Holds the Arduino firmly in place. It provides tough protection for the Arduino UNO while providing access to all Arduino connectors. The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino. Access to all Arduino UNO connectors. Secondary screw-mounting points for securing your Arduino.

Brand	sb components #ad
Manufacturer	SB Components Ltd #ad
Weight	0.09 Pounds
Part Number	SKU02009
Model	SKU02009

7. Artist Unknown

#ad

Transparent Acrylic Enclosure Case Compatible for Arduino UNO with Ethernet Shield

#adArtist Unknown #ad - Rubber Feet. Unique design for uno and Ethernet Shield with pin leakage, which provides easy connection to other components. Made from high grade cast acrylic. Provides excellent protection, and fashionable appearance.

Brand	Artist Unknown #ad
Manufacturer	Crisp Concept Inc #ad

8. DAOKI

#ad

DAOKI Uno R3 Case Enclosure New Transparent Gloss Acrylic Computer Box Compatible with Arduino UNO R3

#adDAOKI #ad - For arduino uno R3 Development Board only. Weight: 53g. Material: A grade acrylic sheet. Dimensions: 79. 5 x 64. 5 x 21mm. With eN instructions.

Brand	DAOKI #ad
Manufacturer	DAOKI #ad
Height	0.6 Inches
Length	3.4 Inches
Weight	0.1 Pounds
Width	3.1 Inches
Part Number	BG-US-964008
Model	BG-US-964008

9. C4Labs

#ad

C4Labs Zebra Case for Arduino Nano

#adC4Labs #ad - Button included for easy use of the Nano’s reset button. Designed and crafted by local artists in Tacoma, WA USA. Need more than one? look for the three pack available at special pricing! For arduino Nano not included. Air vents allow for cooling. Cutouts for access to pinouts.

Brand	C4Labs #ad
Manufacturer	C4 Labs #ad
Height	0.55 Inches
Length	2 Inches
Width	1.25 Inches
Part Number	8541610598
Model	ZEBRA-NANO-BLACKICE

10. sb components

#ad

SB Arduino Uno R3 Enclosure case Box, Black Plastic

#adsb components #ad - This is a no-nonsense protective case designed specifically for the Arduino Uno. The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino. It provides tough protection for the Arduino UNO while providing access to all Arduino connectors. Holds the Arduino firmly in place. Secondary screw-mounting points for securing your Arduino. Includes reset key for use with the Uno's reset button. Access to all Arduino UNO connectors. It also includes an integrated power switch for the Arduino.

Brand	sb components #ad
Manufacturer	SainStore Inc. #ad
Height	1.8 Inches
Length	3 Inches
Weight	0.09 Pounds
Width	2.4 Inches
Part Number	101-30-245
Model	101-30-245