As an Amazon Associate I earn from qualifying purchases.
Slipstream Bracket #ad - Exquisite quality, fit & finish with soft edges sealed in a protective baked-on finish including 7-point paint-safe / grille-safe protection. 100% compatible with autopilot, HomeLink, parking sensors, fsd, & cooling systems using Tesla OEM-specific placement.
See separate listing for Model Y. Two-minute easy installation locks securely in place with two clicks + two security screws - NO holes & NO adhesives.
SnapPlate #ad - 3rd gen, center, height-adjustable license plate mount with high, and low positions. Made from usa-sourced PETG plastic. Patented design installs and removes in seconds with nothing left behind.
Clean, minimal design blends perfectly with the Tesla front end. High-strength plastic and stainless steel with breakaway latch design to reduce expensive damage to the plastic grille on the car in accidents or touch car washes with low-cost replacement parts available! Designed, 3d printed, and assembled in the USA by Tesla owners and fans.
SnapPlate #ad - Patented design installs and removes in seconds with nothing left behind. 3rd gen, center, height-adjustable license plate mount with high, and low positions. Paint-safe, radiator-safe, grille-safe, and Autopilot-safe remove for touch car washes!.
High-strength plastic and stainless steel with breakaway latch design to reduce expensive damage to the plastic grille on the car in accidents or touch car washes with low-cost replacement parts available! Included hardware kit with compact torx security screwdriver, silver and black stainless steel license plate screws, and optional anti-theft security screw.
Slipstream Bracket #ad - Car-wash-safe patented one-piece design made from strong aircraft-grade aluminum NOT plastic that won’t break or snap off. Guaranteed perfect fit for all 2023 and earlier 2023-2020 tesla model Y’s only.
No complicated mechanisms to jam up, warp, or break when subjected to miles of road debris and hot sun or ice-cold weather. Two-minute easy installation locks securely in place with two clicks + two security screws - NO holes & NO adhesives.
iJDMTOY #ad - No drill or modification required, no removal the bumper/grille required neither; can easily be installed in 5-10 mins. Special note: if your vehicle has parking or cruise control sensor, please relocate the mounting stubs slightly to avoid the sensor.
Compatible with 2022-up Gen11 Honda Civic Sedan/Coupe/Hatchback. Relocate/reposition the front license plate off bumper for a JDM modified/racing sporty appearance.
Dasen #ad - Easy mounting and removed. No modification or drilling required to install. Package including: 1 of front license plate mounting bracket. Come with instruction. Installation time: less than 10 minutes. Design for gt350 shelby to add special individual plate and display on front lower grille, will not affect ground clearance.
JOYTUTUS #ad - No holes & no adhesives: No drilling required, won't damage your car's paint or body. If you have any questions about this product, pls free feel to contact us. Custom-fit: compatible with model y 2022 2021 2020 only for original front Grill.
Adjustable height: the license plate frame has 3 preset holes with high, center, and low positions, to customize your desired heights. We will try our best to solve your problem as soon as possible and make you satisfied! High-quality aluminium: joytutus model y front license plate mount is made of sturdy aluminum that won't break or snap off, and is guaranteed to never tarnish or rust !!! Remove the automatic car wash!!! 100% street legal: it will not block in all four corners of the plates state registration tags and they're legal to be on the road.
DV8 Offroad #ad - Dual pod light mounts - on either side of the bracket are LED light pod mounts, which can mount just about any pod light including our Elite Series LED Pod Lights. Installation - this license plate bracket mounts to the standard 2 or 4 hole factory license plate screw locations.
A 20" wide by 7" tall flat surface is required to install. Fitment - compatible with all generations of subaru crosstrek, Subaru Outback, many other SUVs, as well as some off-road front bumpers.
Pop a top - engineered to help keep you hydrated on the trail! The left light bracket has a bottle opener integrated in the design for opening refreshments while relaxing at your campsite or trail.
iJDMTOY #ad - Compatible with the standard 3-inch diameter round tube will not work with any 1. 75"or 2. 5" tubes. Compatible with jeep wrangler jk jl as well as many other trucks or SUVs with aftermarket bumper guard or bull bar setups for a rugged appearance.
AOOTF #ad - Rust-proof. The metal license plate does not directly contact the car paint surface and will not scratch, the license plate rattle proof. Durable and long lasting! 4-hole aluminum License Plate holder black with slim edges, anti-rust, durable, light weight but strong and durable, weatherproof. Matte/gloss black license plate screw cap matches the black license plate holder.
No additional hardware is required to install in a flash. Mounting bracket is made from durable black ABS plastic, anti-wear and corrosion Resist. Front license plate mounting kit- plastic front license plate adapter and black aluminum license plate frame, mounting front license plates to a trailer or adding an additional novelty plate to any vehicle, for vehicles with contoured bumpers, or as a spacer recessed into the license plate area at the rear of the vehicle.
Weather-proof- the license plate mounting bracket and plate frame will tightly lock your license plate on the vehicle. Universal license plate bracket- front license plate holder kit- 6 x 12 inch, anti-corrosion, legal street. Aluminum alloy material, will not cover the license plate Registration information, suitable for standard novelty US or Canadian license plate mount. For those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required.
1. Slipstream Bracket
#adTesla Model 3, NOT Plastic, NO Adhesives, Front License Plate Mounting Bracket Kit, ThatGrin® LLC Low Profile USA-Made Slipstream Bracket®, NO Holes 2023-2017 All Models
#adSee separate listing for Model Y. Two-minute easy installation locks securely in place with two clicks + two security screws - NO holes & NO adhesives.
More information #ad
Guaranteed perfect fit for all 2023 and earlier 2023-2017 tesla model 3’s only. Car-wash-safe patented one-piece design made from strong aircraft-grade aluminum NOT plastic that won’t break or snap off. More sturdy than competing plastic products. No complicated mechanisms to jam up, warp, or break when subjected to miles of road debris and hot sun or ice-cold weather.| Brand | Slipstream Bracket #ad |
| Manufacturer | ThatGrin LLC #ad |
| Height | 9 inches |
| Length | 5.5 inches |
| Width | 11.63 Inches |
| Part Number | 612M3 |
| Model | 612M3 |
More information #ad
2. SnapPlate
#adFast, Grille-Safe Bracket, Removable, Height-Adjustable Front License Plate Mount for 2020-2023 Tesla Model Y, Easy, SnapPlate® Model Y
#adClean, minimal design blends perfectly with the Tesla front end. High-strength plastic and stainless steel with breakaway latch design to reduce expensive damage to the plastic grille on the car in accidents or touch car washes with low-cost replacement parts available! Designed, 3d printed, and assembled in the USA by Tesla owners and fans.
More information #ad
Included hardware kit with compact torx security screwdriver, silver and black stainless steel license plate screws, and optional anti-theft security screw. Paint-safe, grille-safe, radiator-safe, and Autopilot-safe remove for touch car washes!. Fits all years of tesla model y only with USA/CAN/MEX license plates see our other listings for other models.| Brand | SnapPlate #ad |
| Manufacturer | EveryAmp #ad |
| Part Number | SPMY2020US |
| Warranty | Manufacturer accepts returns for any reason within 30 days of purchase. Manufacturer warranties parts against defects and will supply replacement parts for 180 days. Manufacturer will supply discounted replacement parts for failures due to car washes, vandalism, vehicle accidents, or any other test of strength outside of normal use. |
More information #ad
3. SnapPlate
#adFast, Grille-Safe Bracket, SnapPlate® Model 3, Removable, Easy, Height-Adjustable Front License Plate Mount for 2017-2023 Tesla Model 3
#adHigh-strength plastic and stainless steel with breakaway latch design to reduce expensive damage to the plastic grille on the car in accidents or touch car washes with low-cost replacement parts available! Included hardware kit with compact torx security screwdriver, silver and black stainless steel license plate screws, and optional anti-theft security screw.
More information #ad
Designed, 3d printed, and assembled in the USA by Tesla owners and fans. Clean, minimal design blends perfectly with the Tesla front end. Made from usa-sourced PETG plastic. Fits all years of tesla model 3 only with USA/CAN/MEX license plates see our other listings for other models.| Brand | SnapPlate #ad |
| Manufacturer | EveryAmp #ad |
| Part Number | SPM32017US |
| Warranty | Manufacturer accepts returns for any reason within 30 days of purchase. Manufacturer warranties parts against defects and will supply replacement parts for 180 days. Manufacturer will supply discounted replacement parts for failures due to car washes, vandalism, vehicle accidents, or any other test of strength outside of normal use. |
More information #ad
4. Slipstream Bracket
#adNO Adhesives, Patented USA Made Version, NOT Plastic, NO Drilling Front License Plate Mounting Holder, Slipstream Bracket® for 2023-2020 Tesla Model Y by ThatGrin® LLC
#adNo complicated mechanisms to jam up, warp, or break when subjected to miles of road debris and hot sun or ice-cold weather. Two-minute easy installation locks securely in place with two clicks + two security screws - NO holes & NO adhesives.
More information #ad
Exquisite quality, fit & finish with soft edges sealed in a protective baked-on finish including 7-point paint-safe / grille-safe protection. More sturdy than competing plastic products. 100% compatible with autopilot, homelink, fsd, parking sensors, & cooling systems using Tesla OEM-specific placement. See separate listing for Model 3.| Brand | Slipstream Bracket #ad |
| Manufacturer | ThatGrin LLC #ad |
| Height | 10 Inches |
| Length | 5.5 Inches |
| Width | 11.63 Inches |
| Part Number | 612MY |
| Model | 612MY |
More information #ad
5. iJDMTOY
#adIJDMTOY No Drill Front Grille Mesh Mount License Plate Relocator Kit Compatible with 2022-up 11th Gen Honda Civic
#adCompatible with 2022-up Gen11 Honda Civic Sedan/Coupe/Hatchback. Relocate/reposition the front license plate off bumper for a JDM modified/racing sporty appearance.
More information #ad
Utilize the lower grille's mesh/honeycomb to re-locate the license plate without having to drill holes on the bumper please make sure your vehicle's lower grille mesh shape is indeed diamond shape before buying this product.| Brand | iJDMTOY #ad |
| Manufacturer | iJDMTOY Auto Accessories #ad |
| Weight | 0.56 Pounds |
| Part Number | AA3145-Gen11Civic |
| Model | Relocate Front Number Plate Off Bumper |
More information #ad
6. Dasen
#adDasen Lower Grille Front License Plate Mount Bracket Removable Compatible with 2015-2021 Ford Mustang Shelby GT350/GT350R, No Drilling
#adMore information #ad
Fitment: fit 2015-up ford mustang shelby GTR350/GT350R with honeycomb Bumper Grille Only. Made of quality 6061 billet aluminum with Anodized Black Finish, solid and rusting resistance for a long service life.| Brand | Dasen #ad |
| Manufacturer | Dasen #ad |
| Part Number | 613310863984 |
More information #ad
7. JOYTUTUS
#adAluminum License Plate Holder, No Drilling, Front License Plate Frame fits Model Y 2022 2021 2020, JOYTUTUS Height-Adjustable License Plate Mount Kit, Only for Original Front Grill
#adAdjustable height: the license plate frame has 3 preset holes with high, center, and low positions, to customize your desired heights. We will try our best to solve your problem as soon as possible and make you satisfied! High-quality aluminium: joytutus model y front license plate mount is made of sturdy aluminum that won't break or snap off, and is guaranteed to never tarnish or rust !!! Remove the automatic car wash!!! 100% street legal: it will not block in all four corners of the plates state registration tags and they're legal to be on the road.
More information #ad
Package included: 1 * front license plate frame, 14 * Screw, 2 * Washer, 1* Allen wrenches.| Brand | JOYTUTUS #ad |
| Manufacturer | JOYTUTUS #ad |
| Height | 2.76 Inches |
| Length | 7.87 Inches |
| Width | 5.91 Inches |
| Part Number | A2704-03901 |
| Model | A2704-03901 |
More information #ad
8. DV8 Offroad
#adLicense Plate Bracket with Dual Pod Light Mounts for Subaru Crosstrek, Forester & Other SUVs | Front or Rear Bumper Compatible | Mounts to Existing License Plate Location | DV8 Offroad, Outback
#adA 20" wide by 7" tall flat surface is required to install. Fitment - compatible with all generations of subaru crosstrek, Subaru Outback, many other SUVs, as well as some off-road front bumpers.
More information #ad
There are multiple mounting holes to accommodate almost any bumper. Powder coated steel - the license bracket is constructed from precision cut steel for durability, then finished with a weather resistant micro-texture black powder coat finish. Pop a top - engineered to help keep you hydrated on the trail! The left light bracket has a bottle opener integrated in the design for opening refreshments while relaxing at your campsite or trail.
| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Part Number | LPBM-03 |
| Model | LPBM-03 |
More information #ad
9. iJDMTOY
#adIJDMTOY No Drill Required 3-Inch Bumper Guard Tube Mount License Plate Bracket/Holder
#adMore information #ad
Relocate the license plate with no drilling & no modifications required. Complete kit includes a 3" tube mounting clamp, a license plate mounting bracket and a couple of rubber stripes.| Brand | iJDMTOY #ad |
| Manufacturer | iJDMTOY Auto Accessories #ad |
| Weight | 0.69 Pounds |
| Part Number | AA3487 |
| Model | For standard size 3" round shape bullbar |
More information #ad
10. AOOTF
#adFor US Vehicle Trailer Truck, Anti-Theft Lock Screw Bolt Caps, Car Tag Holder Adapter & Black Aluminum Plate Cover, Aootf Front License Plate Bracket- Universal Front Bumper License Plate Mounting Kit
#adNo additional hardware is required to install in a flash. Mounting bracket is made from durable black ABS plastic, anti-wear and corrosion Resist. Front license plate mounting kit- plastic front license plate adapter and black aluminum license plate frame, mounting front license plates to a trailer or adding an additional novelty plate to any vehicle, for vehicles with contoured bumpers, or as a spacer recessed into the license plate area at the rear of the vehicle.
More information #ad
Guarantee- if you're unsatisfied with the durable front license holder bracket for any reason, we'll immediately refund your purchase price Aootf Front License Plate Mounting Kit Any questions, unconditional refund or free replacement. Weather-proof- the license plate mounting bracket and plate frame will tightly lock your license plate on the vehicle. Universal license plate bracket- front license plate holder kit- 6 x 12 inch, anti-corrosion, legal street. Aluminum alloy material, will not cover the license plate Registration information, suitable for standard novelty US or Canadian license plate mount. For those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required.
| Brand | AOOTF #ad |
| Manufacturer | Aootf #ad |
| Height | 0.3 Inches |
| Length | 12 Inches |
| Width | 6 Inches |
| Part Number | Front License Plate Holder |
| Warranty | 1 year |
More information #ad
