Top 8 1/4 Inch Barbed Drip Irrigation Tubing Shut-off Valve – Automatic Drip Irrigation Kits

As an Amazon Associate I earn from qualifying purchases.

1. One Stop Outdoor

#ad

Regulate & Shut Off/Turn On Water Flow, 5-Pack Professional Grade in-Line Barbed Ball Valve 16mm for 1/2 and 5/8 Inch Tubing .570 to .620 ID

#ad
One Stop Outdoor #ad - Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. Simple to install. High impact plastic construction - 5-Pack Barbed Manual Shut Off Valves.

Secure and easy installation without glue, tools, or clamps. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

2. Antelco

#ad

Antelco 42155 Vari-Flow Coupling Valve Barbed 0.16" 1/4" ID Tubing Drip Irrigation 25

#ad
Antelco #ad - 25 barbed Coupling Valves. Antelco 42155 vari-flow coupling valve Barbed 016" 1/4" id tubing Drip Irrigation. Used to control, disperse, slow and/or divert water. Shut-off valve used to connect two sections of 1/4" 016" id tubing. Great for drip micro irrigation.
BrandAntelco #ad
ManufacturerAntelco #ad
Part NumberVari-Flow Valve BxB
Model42155

3. Quickun

#ad

Quickun 1/4" Drip Irrigation Barbed Ball Valve Shut Off Switch Hose Barb Valve for Garden Drip Irrigation Aquarium Hose Tube, 2Pcs

#ad
Quickun #ad - Good helper for planting: effective way to control water flow to individual plants, garden greenhouse, flower bed, planting containers, patio or lawn.

520 - 550 id range. Save both water and energy: 2 pieces switch valves for use with 1/4 inch drip irrigation tubing, helping your adjust water to flow or to turn off, save your energy. Easy to use: top red handle turns to adjust or completely shut off water, easy to operate. Operation: self-piercing design use with 1/4 inch drip tubing or insert into larger drip tubing; Fits most tubing 1/4 inch: approximately. Quality material: good impact plastic constructed and corrosion resistant materials to assure long life.
BrandQuickun #ad
ManufacturerQuickun #ad
Part Number2-0110-ballvalve-2pcs

4. Irritec

#ad

Irritec Tape x 1/4" Barb w/Valve 50 pk

#ad
Irritec #ad - Does not connect to 1/4" tubing. The barb on this fitting is slightly larger than the a standard 1/4" barb. 50 pack. This fitting allows a flow of over 80 GPH at 10 PSI.

This fitting has a shutoff valve which can be used to turn off an individual line of drip tape. Use this fitting to shut off an individual line of drip tape. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole. To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings, and end fittings. If leakage continues to occur, a 1/4 turn with pliers should suffice.
BrandIrritec #ad
ManufacturerIrritec #ad
Height2.1 Inches
Length3.1 Inches
Width2.1 Inches
Part NumberA2-TV5B250-50

5. Antelco

#ad

Antelco Barbed 1/4" .18" Tubing Coupling Valve for Drip Irrigation Systems- 5 Pack Part 42155

#ad
Antelco #ad - 100% satisfaction Guarantee. Pack of 5 individual units. Same day shipping m-F to 5PM EST. Excellent Customer Service.
BrandAntelco #ad
Part Number42155

6. Orbit Underground

#ad

ORBIT UNDERGROUND 612010B 1/4 Barbed Valve 10 Pack, 1/4"

#ad
Orbit Underground #ad - Manufactured in the United states. This product is a 10Pk 1/4 barbed valve. Purpose of use for connectors, valves and fittings, faucet-valves.
BrandOrbit Underground #ad
ManufacturerStandard Plumbing Supply #ad
Height0.5 Inches
Length8 Inches
Weight0.1 Pounds
Width4 Inches
Part Number612010B
Model612010B

7. ANPTGHT

#ad

ANPTGHT 1/4“ Hose Barbed Ball Valve Drip Irrigation Ball Valve Shut Off Switch for Drip Irrigation and Aquariums(Pack of 5)

#ad
ANPTGHT #ad - Application scenario-effectively control water flow to individual plants, lawns, flower beds, farmlands, gardens, greenhouses, suitable for drip irrigation systems, aquarium pumps, etc.

Simple to use-the red handle can be adjusted or completely turned off for easy operation. Installation-simply push the tube firmly against the barb and it will fit very tightly without leakage. Fits most tubing 1/4 inch: approximately. Material-made of high-quality pp material, it has strong anti-oxidation ability, can maintain stable work under different temperatures and different pressures, and has a long service life. Water saving- drip irrigation tubing, helping your adjust water to flow or to turn off, save your energy. 520 - 550 id range.
BrandANPTGHT #ad
ManufacturerANPTGHT #ad
Part Numberaww-123102120

8. One Stop Outdoor

#ad

Fits All Brands 16-17mm Drip Tape AG Tubing 10, Shut Off Valve, Perma Connector Barbed Locking Fitting, One Stop Outdoor 10-Pack Drip Irrigation Tubing 1/2" Universal Shut Off Valve

#ad
One Stop Outdoor #ad - Incoming pressure: 30 PSI. Universal fit: fits all brands 16 & 17mm Drip Tubing! Material: constructed of highly durable UV and chemical-resistant materials to assure long life. Locking fit: barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time! Allows creation of a custom layout for your planting area. Use: 1/2 inch shut locking off valve - connect and configure drip irrigation tubing to your desired layout.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad