Top 9 Speed Controller for Electric Motor – Golf Cart Accessories

As an Amazon Associate I earn from qualifying purchases.

1. E-Z-GO

#ad

EZGO Golf Cart 25864G09 Electronic Speed Controller

#ad
E-Z-GO #ad - 250-amp, 5-pin controller. When it's time to replace the controller, you should also check the Motor since extreme conditions such as lightning can cause both the Controller and Motor permanent damage. Used on 1994-current e-z-go medalist & txt models 36-Volt Series Electric Vehicles without DCS or PDS Applications. Controllers are the most vulnerable to damage from lightning.
BrandE-Z-GO #ad
ManufacturerTextron EZ Go - Parts (FC) #ad
Height7.4 Inches
Length7.5 Inches
Weight2.8 Pounds
Width7.4 Inches
Part Number25864G09
Model25864G09
WarrantyAny Products purchased shall be free from defects in material or workmanship under normal use and service (the "Limited Warranty"). This Limited Warranty with respect only to parts is for defects reported to Company no later than three (3) months from the date of delivery of the Products to the Purchasers location. Products repaired or replaced under this Limited Warranty are warranted for three (3) months from the date of delivery.

2. Aramox

#ad

36V 800W Motor Brushed Speed Controller Box Kit with Throttle Grip for Electric Bicycle Scooter E-Bike, Brushed Controller

#ad
Aramox #ad - High performance- scooter controller can provide stable speed and sensitive control of braking and direction changes to improve driving safety.

Easy to install and use-come with brushed Controller, Throttle Grip, Power Line and Key, with instruction labels on the interface to facilitate installation. High quality material- The wire and interface are sturdy and durable, ensuring low failure rate during long-term use. Fit for- brushed motor controller is suitable for electric bicycles and scooters. Function-36v controller can protect the internal circuit, avoid thermal overload, is good for heat dissipation, safe and reliable. Fits to 7/8 inch 22. 2mm standard handle bars.
BrandAramox #ad
ManufacturerAramox #ad
Height3.94 Inches
Length3.94 Inches
Width3.94 Inches
Part NumberAramoxubyiqg1v72

3. AC Infinity

#ad

Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics, AC Infinity CLOUDLINE T6, Quiet 6” Inline Duct Fan with Temperature Humidity Controller

#ad
AC Infinity #ad - Duct size: 6” | dimensions: 7. 9 x 12. 6 x 8. 4 in. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware. Airflow: 402 cfm | noise: 32 dBA | Bearings: Dual Ball. Designed to ventilate hydroponic grow rooms, cool AV closets, transfer heating/cooling, and exhaust odors. Intelligent controller with temperature and humidity programming, timer, fan speed control, and alarm system.
BrandAC Infinity #ad
Part NumberAI-CLT6
ModelAI-CLT6

4. iPower

#ad

350W, HVAC, Black, iPower Variable Fan Speed Controller Adjuster Cordless for Duct Inline Exhaust Vent Blower

#ad
iPower #ad - Durable 3-pole grounded Plug Construction, No Extra Wires to Deal With. This controller is not compatible with Shaded Pole and Brushless type motors. One control switch for 3 settings: Variable Speed, HIGH, MED, OFF, LOW. Ipower fan speed controller will correctly and precisely adjust the speed of your duct and inline fans. Note: to avoid the risk of burning out the fan motor, controller does NOT adjust below 50%.
BrandiPower #ad
ManufactureriPower #ad
Height3 Inches
Length4 Inches
Weight0.31 Pounds
Width3 Inches
Part NumberGLFANXCONTROL
ModelVariable Fan Speed Controller

5. AC Infinity

#ad

Ventilation Exhaust Fan for Heating Cooling Booster, Hydroponics, Grow Tents, AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan with Speed Controller

#ad
AC Infinity #ad - Duct size: 6” | dimensions: 7. 9 x 12. 6 x 8. 4 in. See t-series for temperature and humidity controls. Features an 8-speed manual controller utilizing PWM. Designed to ventilate grow tents, circulate air, transfer heating/cooling to rooms, exhaust odors, and cool AV racks. Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware. Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance. Airflow: 402 cfm | noise: 32 dBA | Bearings: Dual Ball.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Part NumberAI-CLS6
ModelCLOUDLINE S6

6. FONMY

#ad

FONMY Hanging Display Motor Rotating Motor for Wind Spinner Hanging Decor Ornament Wind Chimes with Mini Remote Controller for Battery Operated Motor-20 RPM Medium Speed

#ad
FONMY #ad - Each purchase includes 1 battery-operated motor + 1 cell-operated mini remote controller. Battery is not included. Mini remote controller gives a simple and easy way to get your hanging decor moving or stopping.

Remote controller can conveniently turns on and switch off the motor, while anywhere your hanging decor hang you desire. Made from durable and strong plastic material with white mirror surface, so it is long lasting and can hold up to 4 pounds of weight, so most wind spinners can fit on this motor. Compact size with exquisite structure: 9cm long x 5. 5cm diameter; Light weight: 02 kg, easily to hang up to save place. Medium revolving speed, approximately 20+/-5 RPM depending on battery power and item weight, this rotating speed perfectly spin your hang decor to show the magical reflective visual effect.
BrandFONMY #ad
ManufacturerFONMY #ad
Height2.2 Inches
Length3.5 Inches
Width2.2 Inches
Part NumberPD-12202

7. Spider Farmer

#ad

Grow Tents, 205 CFM EC Motor Quiet Ventilation Exhaust Fan for Heating Cooling Booster, Hydroponics, SPIDER FARMER 4 Inch Inline Duct Fan with Speed Controller

#ad
Spider Farmer #ad - Quiet & powerfulmixed flow design combined with a ec motor that powers high-quality impellers makes this fan truly energy efficient than a traditional line fan. Adjustable speedthe fan speed controller allows you to set your fan speed freely and it is essential for optimal growth of your plant.

The exhaust fan is ETL/FCC listed. With only 25 watts of power but gives a strong airflow up to 205 CFM, this 4” exhaust fan is silent. Worry free shoppingspider farmer promises to provide excellent customer service support before and after buying. Built to lastmade of premium abs plastic housing for superior durability, making it highly resistant to dust and liquids, IP42 rated, and performs well even in harsh environments.

If you have any questions, please feel free to contact us via email. Lightweight abs blades reduce the airflow resistance, very low noise level, only produces 28 DB, add airflow by 40%. Wide applicationsl designed for air circulation boosting of cooling and heating systems and air-circulation in The 4 Inch Inline duct fan is a great option for grow tents, kitchens, storage rooms, closet, bathrooms, basements and more.
BrandSpider Farmer #ad

8. AC Infinity

#ad

Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics, AC Infinity CLOUDLINE S12, Quiet 12” Inline Duct Fan with Speed Controller

#ad
AC Infinity #ad - See t-series for temperature and humidity controls. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Airflow: 1604 cfm | noise: 62 dBA | Bearings: Dual Ball. Duct size: 12” | dimensions: 14. 9 x 17. 7 x 14. 1 in. Features an 8-speed manual controller utilizing PWM. Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Part NumberAI-CLS12
ModelCLOUDLINE S12

9. AC Infinity

#ad

Quiet 8” Inline Duct Fan with Speed Controller, Ventilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE S8, Grow Tents, Hydroponics

#ad
AC Infinity #ad - Features an 8-speed manual controller utilizing PWM. Duct size: 8” | dimensions: 8. 5 x 11. 9 x 9. 2 in. Airflow: 807 cfm | noise: 39 dBA | Bearings: Dual Ball. Kit also includes corded AC power plug, installation manual, and all necessary mounting hardware. Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance. Designed to ventilate hydroponic grow rooms, transfer heating/cooling, circulate air, cool AV closets, exhaust odors. See t-series for temperature and humidity controls.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Part NumberAI-CLS8
ModelCLOUDLINE S8