Wolfwhoop T1 FPV 5.8GHz MMCX Whip Antenna for Wolfwhoop Q1-M Q4 Q7

#ad
Wolfwhoop #ad - Specification : Item: T1 5. 8ghz mmcx whip antenna gain : 5750~5850MHz, 2dBi±05dbi connector : mmcx male Color : Black Weight : 1. 4±03g length : 70±3mm Frequency : 5. 8g impedance : 50Ω VSWR :.

#ad



FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone

#ad
FrSky SG_B01N5INCBH_US #ad - Protect your perfectly henever the control signal is lost for a period of time. Up to 16ch from sbus ch1-ch15 for pwm, such as f3, ch16 rssi for fc, naze32 flight controller . Full range, so identical to your X4R and D4R setups. Xm plus receiver supports failsage function for all channels. Ultra mini Only 1.

6g!!! specification: Dimension:21. 5x12x3. 5mmlxwxh Weight: 1. 6g number of channels:up to 16ch from sbusch1~ch15 for pWM, CH16 RSSI for FC Operating Voltage Range:3. 7~10v operating current:[email protected] operating Range:FULL range With RSSI output on board:Analog 0~3. 3v firmware upgradeable Compatibility:FrSky D16 mode This insanely tiny 2.

FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone #ad - 4ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craft. Perfect for those racers who are looking to lower their AUW. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Weight:1. 6g, especially for fpv racing drone, mini drone, dimension: 21.5*12*3.

5mml x w x H.

#ad



Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Xt-30u connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. 15 amp 30a instantaneous Current Handling Bullet Connectors. Brand name: amassitem name: xt30ubanana plug: 2mmmetal material: Brass gold-platedPlastic Material: PA66Flammability Rating: UL94 V0Contact Resistance: 070mΩrated voltage: dc 500vrated current: 15ainstantaneous Current: 30ARecommend Use: 1000 timesRecommend Cable Spec.

14-18 awgrecommend temperature: -20°c ~ 120°c xt-30 XT30 XT30U This insanely tiny 2. 4ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craft. Perfect for those racers who are looking to lower their AUW. Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector.

Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - The amass xt30u ensures a solid high-amp connection, perfect for small lipo applications. Protect your perfectly henever the control signal is lost for a period of time. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Weight:1. 6g, especially for fpv racing drone, mini drone, dimension: 21.

5*12*3. 5mml x w x H.

#ad



Wolfwhoop Q4 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Audio Support OSD Configuring via Betaflight Flight Controller

#ad
Wolfwhoop 4335042118 #ad - Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. Xt-30u connector for rc Lipo Batteries Drones Airplanes Cars Vehicles.

Selecting 5645/5925/5945e4/e7/E8 will be invalid action. 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. This insanely tiny 2. 4ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craft. Perfect for those racers who are looking to lower their AUW.

Wolfwhoop Q4 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Audio Support OSD Configuring via Betaflight Flight Controller #ad - 001mw-power up and test your fpv system during a race with zero interference with any neighbor active channels. Fc uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts. One cool feature about this vtx is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern.

Protect your perfectly henever the control signal is lost for a period of time. More information related to ARL, please go to http://www.

#ad



Wolfwhoop TX5 FPV Transmitter 25/200mW Support Betaflight OSD Backpack Configuration VTX for Runcam Micro Swift

#ad
Wolfwhoop #ad - The 37 possible channels of the TX5 have a switchable transmit power of 25mW/200mW. 7-24v input with 5v output, flight controller, OSD, support parameter remotely adjusted by Betaflight, Compatible with betaflight 3.3 and 3. 2. Mmcx has more mating cycles and is more robust. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter.

Weight:1. 6g, mini drone, especially for fpv racing drone, dimension: 21.5*12*3. 5mml x w x H. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, such as 130 110 drone. Frsky xm plus is dual antenna frsky xm is only one, with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.

Wolfwhoop TX5 FPV Transmitter 25/200mW Support Betaflight OSD Backpack Configuration VTX for Runcam Micro Swift #ad - 10 pair high quality amass Female and Male XT30U Connectors. Tx5 weighs at only 2. 8g. 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. The vtx is built on a 19x19mm stackable mode and it can be mounted directly on the back of a Micro Swift. 0

01mw-power up and test your fpv system during a race with zero interference with any neighbor active channels.

#ad



MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle

#ad
MG Chemicals 422B-55ML #ad - Silicone conformal coating 422b is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. Easy rework and repairs: solder through the coating or remove with MG Cat. At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours.

Ideal for high temperature environments. Fc uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts. This vtx is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern. 8309 liquid or 8310A Gel stripper formulations.

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle #ad - The vtx is built on a 19x19mm stackable mode and it can be mounted directly on the back of a Micro Swift. 001mw-power up and test your fpv system during a race with zero interference with any neighbor active channels. Thin up to one half part thinner to one part coating. Full range, so identical to your X4R and D4R setups.

Xm plus receiver supports failsage function for all channels.

#ad



iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 Smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller Pack of 20pcs

#ad
iFlight #ad - Features: high sensitivity, High quality, 5. 9 inch 150mm - length, rf113 silver plated Wire Material Frequency:2400-2500 MHz S. W. R: less than or equal to 1. 5 antenna Gain:1. 5dbi *typical*working temp:-40~80℃humidity:95%~100% rhradiation pattern: omni-Directional Connector: Ipex 4 generation Radiator Material:Cu Package included: 20pcs x FPV Receiver Antenna This insanely tiny 2.

4ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craft. Perfect for those racers who are looking to lower their AUW. It's actually even smaller and lighter than the Eachine VTX03 and with SA feature. Pls note, not suitable for other receiver. Fluoresces under UV-A light blacklight.

iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 Smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller Pack of 20pcs #ad - 8309 liquid or 8310A Gel stripper formulations. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Weight:1. 6g, mini drone, especially for fpv racing drone, dimension: 21.5*12*3. 5mml x w x H. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, such as 130 110 drone.

#ad



SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2

#ad
onelinkmore OL0444-X #ad - Protect your perfectly henever the control signal is lost for a period of time. Product series:type sma is one kinf of rf coaxial connectors that is widely applied, video, high reliability and long life, has a wide range of application, excellent performance, This SMA series is small threaded coaxial connectors with high frequency bandwidth, with small-sized thread coupling, eg: connection for two-way radio, characteristic impedance is 50 Ω, audio, and other test equipment.

Product specification:temp range:-65~+165℃ pe cable-40~+85℃vibration:MIL-STD-202, Method 213Impedance:50ΩFrequency Range:DC~12. 4ghzworking voltage:335v maxinsulation resistance≥ 5000 MΩInsertion loss≤015 db/6ghzsma coaxial adapter body plating:goldplated connector material:Brass Gender:SMA Plug, male pin/SMA Jack, female pin Style:Right Angle Mounting Type:Free hanging This insanely tiny 2.

SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2 #ad - 4ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craft. Perfect for those racers who are looking to lower their AUW. Up to 16ch from sbus ch1-ch15 for pwm, such as f3, ch16 rssi for fc, naze32 flight controller . Maximum constant service temperature of 200 °C 392 °F.

7-24v input with 5v output, osd, support parameter remotely adjusted by Betaflight, flight controller, Compatible with betaflight 3.3 and 3.

#ad



Wolfwhoop T1-S FPV 3pcs 90 Degrees 5.8GHz MMCX Whip Antenna for Wolfwhoop Q1-M Q3 Q3-S Q3-Pro Q4 Q7

#ad
Wolfwhoop T1-S #ad - Specification : Item: T1-S 5. 8ghz 90° mmcx whip antenna gain : 5750~5850MHz, 2dBi±05dbi connector : 90° mmcx male Color : Black Weight : 1. 4±03g length : 70±3mm Frequency : 5. 8g impedance : 50Ω VSWR :.

#ad



Caddx Mini FPV Camera EOS2 Turbo EOS2 4:3 1200TVL 2.1mm FOV 160 Degree 1/3 CMOS NTSC for FPV Quadcopter Racing Drone by Crazepony

#ad
Crazepony Turbo EOS2 4:3 #ad - Heat shrink 3. 5mm 2:1 both red and Black Included - 2 Feet Total. Impedance:50Ω, insertion loss≤015db/3ghz, vswR≤1. 1;teflon insulator ; Color: Gold. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Maximum constant service temperature of 200 °C 392 °F.

No. Upgraded eos2 camera: newest caddx eos2 camera m8 lens, 1200tvl with global wdr, 1/3 inch CMOS sensor, improved with 2 bracket hole, 4:3 aspect ratio compared with EOS1. Lightweight camera great for small builds, perfect use as FPV racing camera. This vtx is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern.

Caddx Mini FPV Camera EOS2 Turbo EOS2 4:3 1200TVL 2.1mm FOV 160 Degree 1/3 CMOS NTSC for FPV Quadcopter Racing Drone by Crazepony #ad - Precision machining, High sensitivity, Low loss signal stability, High quality. A must have for frsky XM+ and X4R rx/tx field repair. Package content : 2 x SMA Female to Male Adapter. Fc uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts.

Full range, so identical to your X4R and D4R setups. Xm plus receiver supports failsage function for all channels. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

#ad



NIDICI XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part

#ad
NIDICI #ad - Precision machining, High sensitivity, Low loss signal stability, High quality. A must have for frsky XM+ and X4R rx/tx field repair. The connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter.

Weight:1. 6g, especially for fpv racing drone, mini drone, dimension: 21.5*12*3. 5mml x w x H. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, such as 130 110 drone. Frsky xm plus is dual antenna frsky xm is only one, it has strong anti-interference, with dual antenna, make sure you can control your drone anytime.

NIDICI XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part #ad - 10 pair high quality amass Female and Male XT30U Connectors. This vtx is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Impedance:50Ω, insertion loss≤015db/3ghz, vswR≤1.

1;teflon insulator ; Color: Gold. 5.

#ad